charge_controller_v7/i2c_controller.syscfg

/**
 * These arguments were used when this file was generated. They will be automatically applied on subsequent loads
 * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments.
 * @cliArgs --device "MSPM0G350X" --part "Default" --package "LQFP-64(PM)" --product "mspm0_sdk@2.03.00.08"
 * @v2CliArgs --device "MSPM0G3507" --package "LQFP-64(PM)" --product "mspm0_sdk@2.03.00.08"
 * @versions {"tool":"1.22.0+3893"}
 */

/**
 * Import the modules used in this configuration.
 */
const Board = scripting.addModule("/ti/driverlib/Board");
const CRC   = scripting.addModule("/ti/driverlib/CRC");
const GPIO  = scripting.addModule("/ti/driverlib/GPIO", {}, false);
const GPIO1 = GPIO.addInstance();
const GPIO2 = GPIO.addInstance();
const GPIO3 = GPIO.addInstance();
const I2C   = scripting.addModule("/ti/driverlib/I2C", {}, false);
const I2C1  = I2C.addInstance();
const I2C2  = I2C.addInstance();

/**
 * Write custom configuration values to the imported modules.
 */

CRC.polynomial = "16_POLYNOMIAL";
CRC.seed       = 0xFFFF;

GPIO1.$name                         = "GPIO_Battery_Charging";
GPIO1.port                          = "PORTB";
GPIO1.associatedPins.create(2);
GPIO1.associatedPins[0].$name       = "PIN_PB0";
GPIO1.associatedPins[0].pin.$assign = "PB0";
GPIO1.associatedPins[1].$name       = "PIN_PB4";
GPIO1.associatedPins[1].pin.$assign = "PB4";

GPIO2.$name                         = "GPIO_Battery_Discharging";
GPIO2.port                          = "PORTB";
GPIO2.associatedPins.create(2);
GPIO2.associatedPins[0].$name       = "PIN_PB8";
GPIO2.associatedPins[0].pin.$assign = "PB8";
GPIO2.associatedPins[1].$name       = "PIN_PB12";
GPIO2.associatedPins[1].pin.$assign = "PB12";

GPIO3.$name                         = "LDAC_PIN";
GPIO3.port                          = "PORTA";
GPIO3.associatedPins[0].$name       = "PIN_PA8";
GPIO3.associatedPins[0].pin.$assign = "PA8";

I2C1.basicEnableController             = true;
I2C1.advControllerTXFIFOTRIG           = "BYTES_1";
I2C1.advAnalogGlitchFilter             = "DISABLED";
I2C1.intController                     = ["ARBITRATION_LOST","NACK","RXFIFO_TRIGGER","RX_DONE","TX_DONE"];
I2C1.$name                             = "I2C_controller";
I2C1.basicTargetAddress                = 0x48;
I2C1.peripheral.sdaPin.$assign         = "PA16";
I2C1.peripheral.sclPin.$assign         = "PA15";
I2C1.sdaPinConfig.$name                = "ti_driverlib_gpio_GPIOPinGeneric0";
I2C1.sdaPinConfig.hideOutputInversion  = scripting.forceWrite(false);
I2C1.sdaPinConfig.onlyInternalResistor = scripting.forceWrite(false);
I2C1.sdaPinConfig.passedPeripheralType = scripting.forceWrite("Digital");
I2C1.sdaPinConfig.enableConfig         = true;
I2C1.sdaPinConfig.internalResistor     = "PULL_UP";
I2C1.sclPinConfig.$name                = "ti_driverlib_gpio_GPIOPinGeneric1";
I2C1.sclPinConfig.hideOutputInversion  = scripting.forceWrite(false);
I2C1.sclPinConfig.onlyInternalResistor = scripting.forceWrite(false);
I2C1.sclPinConfig.passedPeripheralType = scripting.forceWrite("Digital");
I2C1.sclPinConfig.enableConfig         = true;
I2C1.sclPinConfig.internalResistor     = "PULL_UP";

I2C2.$name                             = "I2C_target";
I2C2.basicEnableTarget                 = true;
I2C2.enableDMAEvent1                   = false;
I2C2.enableDMAEvent2                   = false;
I2C2.basicTargetAddress                = 0x48;
I2C2.intTarget                         = ["RXFIFO_TRIGGER","START","STOP","TXFIFO_TRIGGER"];
I2C2.peripheral.$assign                = "I2C0";
I2C2.peripheral.sdaPin.$assign         = "PA0";
I2C2.peripheral.sclPin.$assign         = "PA1";
I2C2.sdaPinConfig.$name                = "ti_driverlib_gpio_GPIOPinGeneric2";
I2C2.sdaPinConfig.hideOutputInversion  = scripting.forceWrite(false);
I2C2.sdaPinConfig.onlyInternalResistor = scripting.forceWrite(false);
I2C2.sdaPinConfig.passedPeripheralType = scripting.forceWrite("Digital");
I2C2.sdaPinConfig.enableConfig         = true;
I2C2.sclPinConfig.$name                = "ti_driverlib_gpio_GPIOPinGeneric3";
I2C2.sclPinConfig.hideOutputInversion  = scripting.forceWrite(false);
I2C2.sclPinConfig.onlyInternalResistor = scripting.forceWrite(false);
I2C2.sclPinConfig.passedPeripheralType = scripting.forceWrite("Digital");
I2C2.sclPinConfig.enableConfig         = true;

const SYSCTL                 = scripting.addModule("/ti/driverlib/SYSCTL", {}, false);
SYSCTL.forceDefaultClkConfig = true;
SYSCTL.clockTreeEn           = true;

/**
 * Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future
 * version of the tool will not impact the pinmux you originally saw.  These lines can be completely deleted in order to
 * re-solve from scratch.
 */
Board.peripheral.$suggestSolution          = "DEBUGSS";
Board.peripheral.swclkPin.$suggestSolution = "PA20";
Board.peripheral.swdioPin.$suggestSolution = "PA19";
I2C1.peripheral.$suggestSolution           = "I2C1";