charge_controller_target_mspm0L1304/main_target.c

#include "src/battery_data/battery.h"
#include "ti/driverlib/dl_i2c.h"
#include "ti_msp_dl_config.h"
//#include "ti/driverlib/dl_i2c.h"
#include <stdio.h>
#include "src/interfaces/i2c_target.h"
#include "src/config.h"
#include "src/peripherals/adc.h"

int8_t handle_read_pending_slot = -1;

/**** Interrupt for Pi to MCU ****/
void I2C_target_INST_IRQHandler(void) {

  uint32_t status = DL_I2C_getPendingInterrupt(I2C_target_INST);
  switch (status) {
  case DL_I2C_IIDX_TARGET_START:
    break;
  case DL_I2C_IIDX_TARGET_STOP:
    break;
  case DL_I2C_IIDX_TARGET_RXFIFO_TRIGGER:
    // only use this function if we are async (filling buffers) - the rest is handled by the mainloop
    if (handle_read_pending_slot == -1) {
        handle_read_pending_slot = mcu_i2c_handle(I2C_target_INST);
    }
    break;
  case DL_I2C_IIDX_TARGET_TXFIFO_TRIGGER:
    break;
  case DL_I2C_IIDX_TARGET_ARBITRATION_LOST:
    break;
  case DL_I2C_IIDX_TIMEOUT_A:
  case DL_I2C_IIDX_TIMEOUT_B:
    DL_I2C_flushTargetRXFIFO(I2C_target_INST);
    DL_I2C_flushTargetTXFIFO(I2C_target_INST);
  default:
    break;
  }
}

_iq15 qVTrim;

int main(void)

{   
    SYSCFG_DL_init();
    NVIC_EnableIRQ(I2C_target_INST_INT_IRQN);
    NVIC_EnableIRQ(ADC12_0_INST_INT_IRQN);

    slot_init();

    initialize_target_address();

    qVTrim = _IQ15div(_IQ15mpy((_IQ15(DL_SYSCTL_getTempCalibrationConstant()) -
            _IQ15(0.5)), _IQ15(ADC_TEMP_VREF_VOLTAGE)), ((uint32_t)(1) << 27));

    DL_ADC12_startConversion(ADC12_0_INST);
    DL_ADC12_enableConversions(ADC12_0_INST);

    delay_cycles(320000*4);
    slot.set_current = 800;

    while (1) {

        if (handle_read_pending_slot != -1) {
            mcu_i2c_handle_read(I2C_target_INST);
            handle_read_pending_slot = -1;
        }
    
        // step 1: update the voltage readings
        slot_read_state();

        // step 2: control loop to adjust the dac / adc values,
        // but only if no error happens
        // (0x80 is the error flag of the state)
        if ((*slot.state & 0x80) == 0) {
            slot_adjust_current();
        } else {
            slot_disable();
        }

        delay_cycles(320000*4);
    }
}