charge_controller_target_mspm0L1304/main_target.syscfg

/**
 * These arguments were used when this file was generated. They will be automatically applied on subsequent loads
 * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments.
 * @cliArgs --device "MSPM0L130X" --part "Default" --package "SOT-16(DYY)" --product "mspm0_sdk@2.04.00.06"
 * @v2CliArgs --device "MSPM0L1304" --package "SOT-16(DYY)" --product "mspm0_sdk@2.04.00.06"
 * @versions {"tool":"1.22.0+3893"}
 */

/**
 * Import the modules used in this configuration.
 */
const GPIO          = scripting.addModule("/ti/driverlib/GPIO", {}, false);
const GPIO1         = GPIO.addInstance();
const I2C           = scripting.addModule("/ti/driverlib/I2C", {}, false);
const I2C1          = I2C.addInstance();
const I2C2          = I2C.addInstance();
const PWM           = scripting.addModule("/ti/driverlib/PWM", {}, false);
const PWM1          = PWM.addInstance();
const SYSCTL        = scripting.addModule("/ti/driverlib/SYSCTL");
const ProjectConfig = scripting.addModule("/ti/project_config/ProjectConfig");

/**
 * Write custom configuration values to the imported modules.
 */
GPIO1.$name                         = "GPIOS";
GPIO1.associatedPins[0].direction   = "INPUT";
GPIO1.associatedPins[0].$name       = "ADDR";
GPIO1.associatedPins[0].pin.$assign = "PA22";

const Board                       = scripting.addModule("/ti/driverlib/Board", {}, false);
Board.peripheral.$assign          = "DEBUGSS";
Board.peripheral.swclkPin.$assign = "PA20";
Board.peripheral.swdioPin.$assign = "PA19";

I2C1.$name                             = "I2C_controller";
I2C1.basicEnableController             = true;
I2C1.intController                     = ["ARBITRATION_LOST","NACK","RXFIFO_TRIGGER","RX_DONE","TXFIFO_TRIGGER","TX_DONE"];
I2C1.peripheral.$assign                = "I2C1";
I2C1.peripheral.sdaPin.$assign         = "PA18";
I2C1.peripheral.sclPin.$assign         = "PA17/OPA1.IN0-";
I2C1.sdaPinConfig.$name                = "ti_driverlib_gpio_GPIOPinGeneric0";
I2C1.sdaPinConfig.hideOutputInversion  = scripting.forceWrite(false);
I2C1.sdaPinConfig.onlyInternalResistor = scripting.forceWrite(false);
I2C1.sdaPinConfig.passedPeripheralType = scripting.forceWrite("Digital");
I2C1.sdaPinConfig.enableConfig         = true;
I2C1.sdaPinConfig.internalResistor     = "PULL_UP";
I2C1.sclPinConfig.$name                = "ti_driverlib_gpio_GPIOPinGeneric1";
I2C1.sclPinConfig.hideOutputInversion  = scripting.forceWrite(false);
I2C1.sclPinConfig.onlyInternalResistor = scripting.forceWrite(false);
I2C1.sclPinConfig.passedPeripheralType = scripting.forceWrite("Digital");
I2C1.sclPinConfig.enableConfig         = true;
I2C1.sclPinConfig.internalResistor     = "PULL_UP";

I2C2.$name                             = "I2C_target";
I2C2.basicEnableTarget                 = true;
I2C2.basicTargetAddress                = 0x48;
I2C2.intTarget                         = ["RXFIFO_TRIGGER","START","STOP","TXFIFO_TRIGGER"];
I2C2.peripheral.sdaPin.$assign         = "PA0";
I2C2.peripheral.sclPin.$assign         = "PA1/NRST";
I2C2.sdaPinConfig.$name                = "ti_driverlib_gpio_GPIOPinGeneric2";
I2C2.sdaPinConfig.hideOutputInversion  = scripting.forceWrite(false);
I2C2.sdaPinConfig.onlyInternalResistor = scripting.forceWrite(false);
I2C2.sdaPinConfig.passedPeripheralType = scripting.forceWrite("Digital");
I2C2.sdaPinConfig.enableConfig         = true;
I2C2.sclPinConfig.$name                = "ti_driverlib_gpio_GPIOPinGeneric3";
I2C2.sclPinConfig.hideOutputInversion  = scripting.forceWrite(false);
I2C2.sclPinConfig.onlyInternalResistor = scripting.forceWrite(false);
I2C2.sclPinConfig.passedPeripheralType = scripting.forceWrite("Digital");
I2C2.sclPinConfig.enableConfig         = true;

PWM1.$name                      = "PWM_0";
PWM1.ccIndex                    = [0];
PWM1.timerCount                 = 320;
PWM1.timerStartTimer            = true;
PWM1.peripheral.ccp0Pin.$assign = "PA26";
PWM1.PWM_CHANNEL_0.$name        = "ti_driverlib_pwm_PWMTimerCC0";
PWM1.PWM_CHANNEL_0.dutyCycle    = 10;
PWM1.ccp0PinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric4";

SYSCTL.disableNRSTPin     = true;
SYSCTL.peripheral.$assign = "SYSCTL";

ProjectConfig.migrationCondition = true;

/**
 * Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future
 * version of the tool will not impact the pinmux you originally saw.  These lines can be completely deleted in order to
 * re-solve from scratch.
 */
I2C2.peripheral.$suggestSolution = "I2C0";
PWM1.peripheral.$suggestSolution = "TIMG1";