/*
 * Copyright (c) 2023, Texas Instruments Incorporated - http://www.ti.com
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * *  Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * *  Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * *  Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/*
 *  ============ ti_msp_dl_config.h =============
 *  Configured MSPM0 DriverLib module declarations
 *
 *  DO NOT EDIT - This file is generated for the MSPM0L130X
 *  by the SysConfig tool.
 */
#ifndef ti_msp_dl_config_h
#define ti_msp_dl_config_h

#define CONFIG_MSPM0L130X
#define CONFIG_MSPM0L1304

#if defined(__ti_version__) || defined(__TI_COMPILER_VERSION__)
#define SYSCONFIG_WEAK __attribute__((weak))
#elif defined(__IAR_SYSTEMS_ICC__)
#define SYSCONFIG_WEAK __weak
#elif defined(__GNUC__)
#define SYSCONFIG_WEAK __attribute__((weak))
#endif

#include <ti/devices/msp/msp.h>
#include <ti/driverlib/driverlib.h>
#include <ti/driverlib/m0p/dl_core.h>

#ifdef __cplusplus
extern "C" {
#endif

/*
 *  ======== SYSCFG_DL_init ========
 *  Perform all required MSP DL initialization
 *
 *  This function should be called once at a point before any use of
 *  MSP DL.
 */


/* clang-format off */

#define POWER_STARTUP_DELAY                                                (16)


#define CPUCLK_FREQ                                                     32000000



/* Defines for PWM_0 */
#define PWM_0_INST                                                         TIMG1
#define PWM_0_INST_IRQHandler                                   TIMG1_IRQHandler
#define PWM_0_INST_INT_IRQN                                     (TIMG1_INT_IRQn)
#define PWM_0_INST_CLK_FREQ                                             32000000
/* GPIO defines for channel 0 */
#define GPIO_PWM_0_C0_PORT                                                 GPIOA
#define GPIO_PWM_0_C0_PIN                                         DL_GPIO_PIN_26
#define GPIO_PWM_0_C0_IOMUX                                      (IOMUX_PINCM27)
#define GPIO_PWM_0_C0_IOMUX_FUNC                     IOMUX_PINCM27_PF_TIMG1_CCP0
#define GPIO_PWM_0_C0_IDX                                    DL_TIMER_CC_0_INDEX




/* Defines for I2C_controller */
#define I2C_controller_INST                                                 I2C1
#define I2C_controller_INST_IRQHandler                           I2C1_IRQHandler
#define I2C_controller_INST_INT_IRQN                               I2C1_INT_IRQn
#define I2C_controller_BUS_SPEED_HZ                                       100000
#define GPIO_I2C_controller_SDA_PORT                                       GPIOA
#define GPIO_I2C_controller_SDA_PIN                               DL_GPIO_PIN_18
#define GPIO_I2C_controller_IOMUX_SDA                            (IOMUX_PINCM19)
#define GPIO_I2C_controller_IOMUX_SDA_FUNC               IOMUX_PINCM19_PF_I2C1_SDA
#define GPIO_I2C_controller_SCL_PORT                                       GPIOA
#define GPIO_I2C_controller_SCL_PIN                               DL_GPIO_PIN_17
#define GPIO_I2C_controller_IOMUX_SCL                            (IOMUX_PINCM18)
#define GPIO_I2C_controller_IOMUX_SCL_FUNC               IOMUX_PINCM18_PF_I2C1_SCL

/* Defines for I2C_target */
#define I2C_target_INST                                                     I2C0
#define I2C_target_INST_IRQHandler                               I2C0_IRQHandler
#define I2C_target_INST_INT_IRQN                                   I2C0_INT_IRQn
#define I2C_target_TARGET_OWN_ADDR                                          0x48
#define GPIO_I2C_target_SDA_PORT                                           GPIOA
#define GPIO_I2C_target_SDA_PIN                                    DL_GPIO_PIN_0
#define GPIO_I2C_target_IOMUX_SDA                                 (IOMUX_PINCM1)
#define GPIO_I2C_target_IOMUX_SDA_FUNC                  IOMUX_PINCM1_PF_I2C0_SDA
#define GPIO_I2C_target_SCL_PORT                                           GPIOA
#define GPIO_I2C_target_SCL_PIN                                    DL_GPIO_PIN_1
#define GPIO_I2C_target_IOMUX_SCL                                 (IOMUX_PINCM2)
#define GPIO_I2C_target_IOMUX_SCL_FUNC                  IOMUX_PINCM2_PF_I2C0_SCL


/* clang-format on */

void SYSCFG_DL_init(void);
void SYSCFG_DL_initPower(void);
void SYSCFG_DL_GPIO_init(void);
void SYSCFG_DL_SYSCTL_init(void);
void SYSCFG_DL_PWM_0_init(void);
void SYSCFG_DL_I2C_controller_init(void);
void SYSCFG_DL_I2C_target_init(void);


#ifdef __cplusplus
}
#endif

#endif /* ti_msp_dl_config_h */