charge_controller_MSPM0G3507/main.syscfg

/**
 * These arguments were used when this file was generated. They will be automatically applied on subsequent loads
 * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments.
 * @cliArgs --device "MSPM0G350X" --part "Default" --package "LQFP-48(PT)" --product "mspm0_sdk@2.03.00.08"
 * @v2CliArgs --device "MSPM0G3507" --package "LQFP-48(PT)" --product "mspm0_sdk@2.03.00.08"
 * @versions {"tool":"1.22.0+3893"}
 */

/**
 * Import the modules used in this configuration.
 */
const Board         = scripting.addModule("/ti/driverlib/Board");
const GPIO          = scripting.addModule("/ti/driverlib/GPIO", {}, false);
const GPIO1         = GPIO.addInstance();
const GPIO2         = GPIO.addInstance();
const GPIO3         = GPIO.addInstance();
const I2C           = scripting.addModule("/ti/driverlib/I2C", {}, false);
const I2C1          = I2C.addInstance();
const I2C2          = I2C.addInstance();
const PWM           = scripting.addModule("/ti/driverlib/PWM", {}, false);
const PWM1          = PWM.addInstance();
const SYSCTL        = scripting.addModule("/ti/driverlib/SYSCTL");
const WWDT          = scripting.addModule("/ti/driverlib/WWDT", {}, false);
const WWDT1         = WWDT.addInstance();
const ProjectConfig = scripting.addModule("/ti/project_config/ProjectConfig");

/**
 * Write custom configuration values to the imported modules.
 */
Board.configureUnused             = true;
Board.peripheral.$assign          = "DEBUGSS";
Board.peripheral.swclkPin.$assign = "PA20";
Board.peripheral.swdioPin.$assign = "PA19";

GPIO1.$name                         = "GPIO_Battery_Charging";
GPIO1.port                          = "PORTB";
GPIO1.associatedPins[0].$name       = "PIN_PB6";
GPIO1.associatedPins[0].pin.$assign = "PB6";

GPIO2.$name                         = "GPIO_Battery_Discharging";
GPIO2.port                          = "PORTB";
GPIO2.associatedPins[0].$name       = "PIN_PB7";
GPIO2.associatedPins[0].pin.$assign = "PB7";

GPIO3.port                          = "PORTA";
GPIO3.$name                         = "GPIO_ADDR_PINS";
GPIO3.associatedPins.create(4);
GPIO3.associatedPins[0].$name       = "ADDR_0";
GPIO3.associatedPins[0].direction   = "INPUT";
GPIO3.associatedPins[0].pin.$assign = "PA14";
GPIO3.associatedPins[1].$name       = "ADDR_1";
GPIO3.associatedPins[1].direction   = "INPUT";
GPIO3.associatedPins[1].pin.$assign = "PA15";
GPIO3.associatedPins[2].$name       = "ADDR_2";
GPIO3.associatedPins[2].direction   = "INPUT";
GPIO3.associatedPins[2].pin.$assign = "PA16";
GPIO3.associatedPins[3].$name       = "ADDR_3";
GPIO3.associatedPins[3].direction   = "INPUT";
GPIO3.associatedPins[3].pin.$assign = "PA17";

I2C1.$name                     = "I2C_0";
I2C1.basicEnableTarget         = true;
I2C1.intTarget                 = ["RXFIFO_TRIGGER","RX_DONE","START","STOP","TXFIFO_TRIGGER","TX_DONE"];
I2C1.basicTargetAddress        = 0x20;
I2C1.peripheral.$assign        = "I2C0";
I2C1.peripheral.sdaPin.$assign = "PA0";
I2C1.peripheral.sclPin.$assign = "PA1";
I2C1.sdaPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric0";
I2C1.sclPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric1";

I2C2.$name                     = "I2C_1";
I2C2.basicEnableController     = true;
I2C2.intController             = ["ARBITRATION_LOST","NACK","RXFIFO_TRIGGER","RX_DONE","TXFIFO_TRIGGER","TX_DONE"];
I2C2.peripheral.$assign        = "I2C1";
I2C2.peripheral.sdaPin.$assign = "PA3";
I2C2.peripheral.sclPin.$assign = "PA4";
I2C2.sdaPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric2";
I2C2.sdaPinConfig.enableConfig = true;
I2C2.sclPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric3";
I2C2.sclPinConfig.enableConfig = true;

PWM1.$name                      = "PWM_0";
PWM1.timerCount                 = 320;
PWM1.timerStartTimer            = true;
PWM1.ccIndex                    = [0];
PWM1.peripheral.ccp0Pin.$assign = "PA5";
PWM1.PWM_CHANNEL_0.$name        = "ti_driverlib_pwm_PWMTimerCC0";
PWM1.PWM_CHANNEL_0.invert       = true;
PWM1.ccp0PinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric4";

SYSCTL.peripheral.$assign = "SYSCTL";

WWDT1.$name             = "WWDT0";
WWDT1.wwdtMode          = "INTERVAL";
WWDT1.sleepMode         = true;
WWDT1.enabledInterrupts = true;

ProjectConfig.migrationCondition = true;

/**
 * Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future
 * version of the tool will not impact the pinmux you originally saw.  These lines can be completely deleted in order to
 * re-solve from scratch.
 */
PWM1.peripheral.$suggestSolution  = "TIMG0";
WWDT1.peripheral.$suggestSolution = "WWDT0";