charge_controller_MSPM0G3507/main.syscfg

/**
 * These arguments were used when this file was generated. They will be automatically applied on subsequent loads
 * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments.
 * @cliArgs --device "MSPM0G350X" --part "Default" --package "LQFP-64(PM)" --product "mspm0_sdk@2.03.00.08"
 * @v2CliArgs --device "MSPM0G3507" --package "LQFP-64(PM)" --product "mspm0_sdk@2.03.00.08"
 * @versions {"tool":"1.22.0+3893"}
 */

/**
 * Import the modules used in this configuration.
 */
const GPIO          = scripting.addModule("/ti/driverlib/GPIO", {}, false);
const GPIO1         = GPIO.addInstance();
const GPIO2         = GPIO.addInstance();
const I2C           = scripting.addModule("/ti/driverlib/I2C", {}, false);
const I2C1          = I2C.addInstance();
const I2C2          = I2C.addInstance();
const SYSCTL        = scripting.addModule("/ti/driverlib/SYSCTL");
const ProjectConfig = scripting.addModule("/ti/project_config/ProjectConfig");

/**
 * Write custom configuration values to the imported modules.
 */
GPIO1.$name                         = "GPIO_Battery_Charging";
GPIO1.port                          = "PORTB";
GPIO1.associatedPins.create(2);
GPIO1.associatedPins[0].$name       = "PIN_PB0";
GPIO1.associatedPins[0].pin.$assign = "PB0";
GPIO1.associatedPins[1].$name       = "PIN_PB4";
GPIO1.associatedPins[1].pin.$assign = "PB4";

const Board = scripting.addModule("/ti/driverlib/Board", {}, false);

GPIO2.$name                         = "GPIO_Battery_Discharging";
GPIO2.port                          = "PORTB";
GPIO2.associatedPins.create(2);
GPIO2.associatedPins[0].$name       = "PIN_PB8";
GPIO2.associatedPins[0].pin.$assign = "PB8";
GPIO2.associatedPins[1].$name       = "PIN_PB12";
GPIO2.associatedPins[1].pin.$assign = "PB12";

I2C1.$name              = "I2C_0";
I2C1.basicEnableTarget  = true;
I2C1.intTarget          = ["RXFIFO_TRIGGER","RX_DONE","START","STOP","TXFIFO_TRIGGER","TX_DONE"];
I2C1.sdaPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric0";
I2C1.sclPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric1";

I2C2.$name                     = "I2C_1";
I2C2.basicEnableController     = true;
I2C2.intController             = ["ARBITRATION_LOST","NACK","RXFIFO_TRIGGER","RX_DONE","TXFIFO_TRIGGER","TX_DONE"];
I2C2.peripheral.sdaPin.$assign = "PA3";
I2C2.peripheral.sclPin.$assign = "PA4";
I2C2.sdaPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric2";
I2C2.sclPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric3";


ProjectConfig.deviceSpin = "MSPM0G3507";

/**
 * Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future
 * version of the tool will not impact the pinmux you originally saw.  These lines can be completely deleted in order to
 * re-solve from scratch.
 */
Board.peripheral.$suggestSolution          = "DEBUGSS";
Board.peripheral.swclkPin.$suggestSolution = "PA20";
Board.peripheral.swdioPin.$suggestSolution = "PA19";
I2C1.peripheral.$suggestSolution           = "I2C0";
I2C1.peripheral.sdaPin.$suggestSolution    = "PA0";
I2C1.peripheral.sclPin.$suggestSolution    = "PA1";
I2C2.peripheral.$suggestSolution           = "I2C1";
SYSCTL.peripheral.$suggestSolution         = "SYSCTL";