#include "ti/driverlib/m0p/dl_core.h"
#include "ti/driverlib/m0p/sysctl/dl_sysctl_mspm0g1x0x_g3x0x.h"
#include "ti_msp_dl_config.h"
#include "src/pi/i2c_pi_target.h"
#include "src/controller/controller.h"
#include "ti/driverlib/dl_i2c.h"
#include "src/battery_data/battery.h"
#include "src/cc_cv_charging.h"
#include <stdio.h>
#include "src/battery_data/battery.h"
#include "mock_setup.h"


//define the varibales:
volatile bool picommandPending = false;
volatile bool watchdog_triggered= false;


// Interrupt for I2C instance -> MCU to Target

void I2C_1_INST_IRQHandler(void)
{
    switch (DL_I2C_getPendingInterrupt(I2C_1_INST)) 
    {   
        case DL_I2C_IIDX_CONTROLLER_START:
            break;

        case DL_I2C_IIDX_CONTROLLER_RXFIFO_TRIGGER:
      
            while(DL_I2C_isControllerRXFIFOEmpty(I2C_1_INST) != true) {
                if(rxPacket.rxCount < rxPacket.rxLen){
                     //Get byte from the I2C RX FIFO of the target
                    rxPacket.rxBuffer[rxPacket.rxCount++]= DL_I2C_receiveControllerData(I2C_1_INST);
                }else{
                    DL_I2C_receiveControllerData(I2C_1_INST);
                }
            }
           
            if(rxPacket.rxCount >= rxPacket.rxLen){
                DL_I2C_enableInterrupt(I2C_1_INST, DL_I2C_INTERRUPT_CONTROLLER_STOP);
                rxPacket.rxComplete= true;
            }
            break;
            
        case DL_I2C_IIDX_CONTROLLER_TXFIFO_TRIGGER:
            /* Fill TX FIFO with bytes to send */
            //DL_I2C_fillControllerTXFIFO(I2C_1_INST, (uint8_t *)&txPacket.txBuffer[0], 1); 
            txPacket.txComplete= true; 
            break;

        case DL_I2C_IIDX_CONTROLLER_STOP:
            break;

        case DL_I2C_IIDX_CONTROLLER_ARBITRATION_LOST:
            break;
        case DL_I2C_IIDX_CONTROLLER_NACK:
            break; 
        case DL_I2C_IIDX_TIMEOUT_A:
        case DL_I2C_IIDX_TIMEOUT_B:
            break;
        default:
            break;
    }
}


void I2C_0_INST_IRQHandler(void)
{
    switch (DL_I2C_getPendingInterrupt(I2C_0_INST)) 
    {   
        case DL_I2C_IIDX_TARGET_START:
            DL_I2C_flushTargetTXFIFO(I2C_0_INST);
            break;

        case DL_I2C_IIDX_TARGET_RXFIFO_TRIGGER:
            if (DL_I2C_isTargetRXFIFOEmpty(I2C_0_INST)) {
                return;
            }
            picommandPending = true;
            break;

        case DL_I2C_IIDX_TARGET_TXFIFO_TRIGGER:
            /* Fill TX FIFO with bytes to send */
            picommandPending = true;
            break;
        case DL_I2C_IIDX_TARGET_STOP:
            picommandPending = true;
            DL_I2C_flushTargetTXFIFO(I2C_0_INST);
            DL_I2C_flushTargetRXFIFO(I2C_0_INST);
            break;
        case DL_I2C_IIDX_TARGET_ARBITRATION_LOST:
            break; 
        default:
            break;
    }
}


int main(void)
{  
    SYSCFG_DL_init();
    Battery_Init();
    //dynamic addressing function call for Pi
    dynamic_gpio_addressing();
    //Interrupt routine for Pi
    NVIC_EnableIRQ(I2C_0_INST_INT_IRQN);
    //Interrupt for target mcu
    NVIC_EnableIRQ(I2C_1_INST_INT_IRQN);

    while(1)
    {   
         
        for(uint8_t slot_id= 0; slot_id< NUM_SLOTS; slot_id++){
            if(picommandPending)
            {   //printf("Pi Interrupt Triggered.\n");
                pi_i2c_mcu();
                picommandPending = false;
            }

            //GET battery measurement from the Target
            printf("Reading Battery Measurement for slot %d\n", slot_id);
            getBatteryMeasurement(slot_id);

            //Reading battery state:
            Battery_StateCondition(slot_id);

            printf("Battery State: %d, Charging State:%d\n", battery_data[slot_id].battery_state, battery_data[slot_id].battery_charging_state);

            //function for CC-CV Charging cycle
            CC_CV_ControlCharging(slot_id);
            
            /*if(battery_data[slot_id].batteryLimitReceived){
                printf("Slot Id: %d, Min Voltage: %d, Max Voltage: %d, Charge Fraction:%d, Capacitance: %d, CutOff Current:%d\n",slot_id, battery_data[slot_id].min_voltage, battery_data[slot_id].max_voltage,
                battery_data[slot_id].charge_fraction, battery_data[slot_id].capacitance, battery_data[slot_id].cut_off_current);
            }*/
            
            delay_cycles(MEASUREMENT_CHECK_INTERVAL);
            
            
        
        }
        
    }
}