confiuration for PWM added to PA5/Pin number 11, Checked Inverted Cycle

main.syscfg

@@ -1,8 +1,8 @@
 /**
  * These arguments were used when this file was generated. They will be automatically applied on subsequent loads
  * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments.
- * @cliArgs --device "MSPM0G350X" --part "Default" --package "LQFP-64(PM)" --product "mspm0_sdk@2.03.00.08"
- * @v2CliArgs --device "MSPM0G3507" --package "LQFP-64(PM)" --product "mspm0_sdk@2.03.00.08"
+ * @cliArgs --device "MSPM0G350X" --part "Default" --package "LQFP-48(PT)" --product "mspm0_sdk@2.03.00.08"
+ * @v2CliArgs --device "MSPM0G3507" --package "LQFP-48(PT)" --product "mspm0_sdk@2.03.00.08"
  * @versions {"tool":"1.22.0+3893"}
  */
 
@@ -12,7 +12,6 @@
 const GPIO          = scripting.addModule("/ti/driverlib/GPIO", {}, false);
 const GPIO1         = GPIO.addInstance();
 const GPIO2         = GPIO.addInstance();
-const GPIO3         = GPIO.addInstance();
 const I2C           = scripting.addModule("/ti/driverlib/I2C", {}, false);
 const I2C1          = I2C.addInstance();
 const I2C2          = I2C.addInstance();
@@ -24,64 +23,60 @@ const ProjectConfig = scripting.addModule("/ti/project_config/ProjectConfig");
 /**
  * Write custom configuration values to the imported modules.
  */
-GPIO1.$name                         = "GPIO_Battery_Charging";
-GPIO1.port                          = "PORTB";
-GPIO1.associatedPins.create(2);
-GPIO1.associatedPins[0].$name       = "PIN_PB0";
-GPIO1.associatedPins[0].pin.$assign = "PB0";
-GPIO1.associatedPins[1].$name       = "PIN_PB4";
-GPIO1.associatedPins[1].pin.$assign = "PB4";
+GPIO1.$name                   = "GPIO_Battery_Charging";
+GPIO1.port                    = "PORTB";
+GPIO1.associatedPins[0].$name = "PIN_PB6";
 
-const Board = scripting.addModule("/ti/driverlib/Board", {}, false);
+const Board                       = scripting.addModule("/ti/driverlib/Board", {}, false);
+Board.peripheral.$assign          = "DEBUGSS";
+Board.peripheral.swclkPin.$assign = "PA20";
+Board.peripheral.swdioPin.$assign = "PA19";
 
-GPIO2.$name                         = "GPIO_Battery_Discharging";
-GPIO2.port                          = "PORTB";
-GPIO2.associatedPins.create(2);
-GPIO2.associatedPins[0].$name       = "PIN_PB8";
-GPIO2.associatedPins[0].pin.$assign = "PB8";
-GPIO2.associatedPins[1].$name       = "PIN_PB12";
-GPIO2.associatedPins[1].pin.$assign = "PB12";
+GPIO2.$name                   = "GPIO_Battery_Discharging";
+GPIO2.port                    = "PORTB";
+GPIO2.associatedPins[0].$name = "PIN_PB7";
 
-GPIO3.$name                         = "PWM_GPIO";
-GPIO3.associatedPins[0].$name       = "PIN_GPIO";
-GPIO3.associatedPins[0].pin.$assign = "PA5";
+I2C1.$name                     = "I2C_0";
+I2C1.basicEnableTarget         = true;
+I2C1.intTarget                 = ["RXFIFO_TRIGGER","RX_DONE","START","STOP","TXFIFO_TRIGGER","TX_DONE"];
+I2C1.peripheral.$assign        = "I2C0";
+I2C1.peripheral.sdaPin.$assign = "PA10";
+I2C1.peripheral.sclPin.$assign = "PA1";
+I2C1.sdaPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric0";
+I2C1.sclPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric1";
 
-I2C1.$name              = "I2C_0";
-I2C1.basicEnableTarget  = true;
-I2C1.intTarget          = ["RXFIFO_TRIGGER","RX_DONE","START","STOP","TXFIFO_TRIGGER","TX_DONE"];
-I2C1.sdaPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric0";
-I2C1.sclPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric1";
-
-I2C2.$name                     = "I2C_1";
-I2C2.basicEnableController     = true;
-I2C2.intController             = ["ARBITRATION_LOST","NACK","RXFIFO_TRIGGER","RX_DONE","TXFIFO_TRIGGER","TX_DONE"];
-I2C2.peripheral.sdaPin.$assign = "PA3";
-I2C2.peripheral.sclPin.$assign = "PA4";
-I2C2.sdaPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric2";
-I2C2.sclPinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric3";
+I2C2.$name                         = "I2C_1";
+I2C2.basicEnableController         = true;
+I2C2.intController                 = ["ARBITRATION_LOST","NACK","RXFIFO_TRIGGER","RX_DONE","TXFIFO_TRIGGER","TX_DONE"];
+I2C2.peripheral.$assign            = "I2C1";
+I2C2.peripheral.sdaPin.$assign     = "PA3";
+I2C2.peripheral.sclPin.$assign     = "PA4";
+I2C2.sdaPinConfig.$name            = "ti_driverlib_gpio_GPIOPinGeneric2";
+I2C2.sdaPinConfig.enableConfig     = true;
+I2C2.sdaPinConfig.internalResistor = "PULL_UP";
+I2C2.sclPinConfig.$name            = "ti_driverlib_gpio_GPIOPinGeneric3";
+I2C2.sclPinConfig.enableConfig     = true;
+I2C2.sclPinConfig.internalResistor = "PULL_UP";
 
 PWM1.$name                      = "PWM_0";
 PWM1.timerCount                 = 320;
 PWM1.timerStartTimer            = true;
 PWM1.ccIndex                    = [0];
-PWM1.peripheral.ccp0Pin.$assign = "PA0";
+PWM1.peripheral.ccp0Pin.$assign = "PA5";
 PWM1.PWM_CHANNEL_0.$name        = "ti_driverlib_pwm_PWMTimerCC0";
+PWM1.PWM_CHANNEL_0.invert       = true;
+PWM1.PWM_CHANNEL_0.ccValue      = 320;
 PWM1.ccp0PinConfig.$name        = "ti_driverlib_gpio_GPIOPinGeneric4";
 
+SYSCTL.peripheral.$assign = "SYSCTL";
 
-ProjectConfig.deviceSpin = "MSPM0G3507";
+ProjectConfig.migrationCondition = true;
 
 /**
  * Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future
  * version of the tool will not impact the pinmux you originally saw.  These lines can be completely deleted in order to
  * re-solve from scratch.
  */
-Board.peripheral.$suggestSolution          = "DEBUGSS";
-Board.peripheral.swclkPin.$suggestSolution = "PA20";
-Board.peripheral.swdioPin.$suggestSolution = "PA19";
-I2C1.peripheral.$suggestSolution           = "I2C0";
-I2C1.peripheral.sdaPin.$suggestSolution    = "PA10";
-I2C1.peripheral.sclPin.$suggestSolution    = "PA1";
-I2C2.peripheral.$suggestSolution           = "I2C1";
-PWM1.peripheral.$suggestSolution           = "TIMA0";
-SYSCTL.peripheral.$suggestSolution         = "SYSCTL";
+GPIO1.associatedPins[0].pin.$suggestSolution = "PB3";
+GPIO2.associatedPins[0].pin.$suggestSolution = "PB2";
+PWM1.peripheral.$suggestSolution             = "TIMG0";