sw_segment/segment_main/Debug/ti_msp_dl_config.h

/*
 * Copyright (c) 2023, Texas Instruments Incorporated - http://www.ti.com
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * *  Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * *  Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * *  Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/*
 *  ============ ti_msp_dl_config.h =============
 *  Configured MSPM0 DriverLib module declarations
 *
 *  DO NOT EDIT - This file is generated for the MSPM0G350X
 *  by the SysConfig tool.
 */
#ifndef ti_msp_dl_config_h
#define ti_msp_dl_config_h

#define CONFIG_MSPM0G350X
#define CONFIG_MSPM0G3507

#if defined(__ti_version__) || defined(__TI_COMPILER_VERSION__)
#define SYSCONFIG_WEAK __attribute__((weak))
#elif defined(__IAR_SYSTEMS_ICC__)
#define SYSCONFIG_WEAK __weak
#elif defined(__GNUC__)
#define SYSCONFIG_WEAK __attribute__((weak))
#endif

#include <ti/devices/msp/msp.h>
#include <ti/driverlib/driverlib.h>
#include <ti/driverlib/m0p/dl_core.h>

#ifdef __cplusplus
extern "C" {
#endif

/*
 *  ======== SYSCFG_DL_init ========
 *  Perform all required MSP DL initialization
 *
 *  This function should be called once at a point before any use of
 *  MSP DL.
 */


/* clang-format off */

#define POWER_STARTUP_DELAY                                                (16)


#define GPIO_HFXT_PORT                                                     GPIOA
#define GPIO_HFXIN_PIN                                             DL_GPIO_PIN_5
#define GPIO_HFXIN_IOMUX                                         (IOMUX_PINCM10)
#define GPIO_HFXOUT_PIN                                            DL_GPIO_PIN_6
#define GPIO_HFXOUT_IOMUX                                        (IOMUX_PINCM11)
#define CPUCLK_FREQ                                                     32000000




/* Defines for ADC12_0 */
#define ADC12_0_INST                                                        ADC0
#define ADC12_0_INST_IRQHandler                                  ADC0_IRQHandler
#define ADC12_0_INST_INT_IRQN                                    (ADC0_INT_IRQn)
#define ADC12_0_ADCMEM_0                                      DL_ADC12_MEM_IDX_0
#define ADC12_0_ADCMEM_0_REF                     DL_ADC12_REFERENCE_VOLTAGE_VDDA
#define ADC12_0_ADCMEM_0_REF_VOLTAGE_V                                       3.3
#define ADC12_0_ADCMEM_1                                      DL_ADC12_MEM_IDX_1
#define ADC12_0_ADCMEM_1_REF                     DL_ADC12_REFERENCE_VOLTAGE_VDDA
#define ADC12_0_ADCMEM_1_REF_VOLTAGE_V                                       3.3
#define ADC12_0_ADCMEM_2                                      DL_ADC12_MEM_IDX_2
#define ADC12_0_ADCMEM_2_REF                     DL_ADC12_REFERENCE_VOLTAGE_VDDA
#define ADC12_0_ADCMEM_2_REF_VOLTAGE_V                                       3.3
#define GPIO_ADC12_0_C2_PORT                                               GPIOA
#define GPIO_ADC12_0_C2_PIN                                       DL_GPIO_PIN_25
#define GPIO_ADC12_0_C3_PORT                                               GPIOA
#define GPIO_ADC12_0_C3_PIN                                       DL_GPIO_PIN_24
#define GPIO_ADC12_0_C7_PORT                                               GPIOA
#define GPIO_ADC12_0_C7_PIN                                       DL_GPIO_PIN_22



/* Port definition for Pin Group GPIO_MULTIPLEXER_PIN_CONFIG */
#define GPIO_MULTIPLEXER_PIN_CONFIG_PORT                                 (GPIOA)

/* Defines for PIN_E1: GPIOA.9 with pinCMx 20 on package pin 14 */
#define GPIO_MULTIPLEXER_PIN_CONFIG_PIN_E1_PIN                   (DL_GPIO_PIN_9)
#define GPIO_MULTIPLEXER_PIN_CONFIG_PIN_E1_IOMUX                 (IOMUX_PINCM20)
/* Defines for PIN_S0: GPIOA.23 with pinCMx 53 on package pin 26 */
#define GPIO_MULTIPLEXER_PIN_CONFIG_PIN_S0_PIN                  (DL_GPIO_PIN_23)
#define GPIO_MULTIPLEXER_PIN_CONFIG_PIN_S0_IOMUX                 (IOMUX_PINCM53)
/* Defines for PIN_S1: GPIOA.4 with pinCMx 9 on package pin 11 */
#define GPIO_MULTIPLEXER_PIN_CONFIG_PIN_S1_PIN                   (DL_GPIO_PIN_4)
#define GPIO_MULTIPLEXER_PIN_CONFIG_PIN_S1_IOMUX                  (IOMUX_PINCM9)
/* Defines for PIN_S2: GPIOA.3 with pinCMx 8 on package pin 10 */
#define GPIO_MULTIPLEXER_PIN_CONFIG_PIN_S2_PIN                   (DL_GPIO_PIN_3)
#define GPIO_MULTIPLEXER_PIN_CONFIG_PIN_S2_IOMUX                  (IOMUX_PINCM8)
/* Defines for PIN_E0: GPIOA.11 with pinCMx 22 on package pin 16 */
#define GPIO_MULTIPLEXER_PIN_CONFIG_PIN_E0_PIN                  (DL_GPIO_PIN_11)
#define GPIO_MULTIPLEXER_PIN_CONFIG_PIN_E0_IOMUX                 (IOMUX_PINCM22)




/* Defines for MCAN0 */
#define MCAN0_INST                                                        CANFD0
#define GPIO_MCAN0_CAN_TX_PORT                                             GPIOA
#define GPIO_MCAN0_CAN_TX_PIN                                     DL_GPIO_PIN_26
#define GPIO_MCAN0_IOMUX_CAN_TX                                  (IOMUX_PINCM59)
#define GPIO_MCAN0_IOMUX_CAN_TX_FUNC               IOMUX_PINCM59_PF_CANFD0_CANTX
#define GPIO_MCAN0_CAN_RX_PORT                                             GPIOA
#define GPIO_MCAN0_CAN_RX_PIN                                     DL_GPIO_PIN_27
#define GPIO_MCAN0_IOMUX_CAN_RX                                  (IOMUX_PINCM60)
#define GPIO_MCAN0_IOMUX_CAN_RX_FUNC               IOMUX_PINCM60_PF_CANFD0_CANRX
#define MCAN0_INST_IRQHandler                                 CANFD0_IRQHandler
#define MCAN0_INST_INT_IRQN                                     CANFD0_INT_IRQn


/* Defines for MCAN0 MCAN RAM configuration */
#define MCAN0_INST_MCAN_STD_ID_FILT_START_ADDR     (0)
#define MCAN0_INST_MCAN_STD_ID_FILTER_NUM          (2)
#define MCAN0_INST_MCAN_EXT_ID_FILT_START_ADDR     (0)
#define MCAN0_INST_MCAN_EXT_ID_FILTER_NUM          (0)
#define MCAN0_INST_MCAN_TX_BUFF_START_ADDR         (148)
#define MCAN0_INST_MCAN_TX_BUFF_SIZE               (2)
#define MCAN0_INST_MCAN_FIFO_1_START_ADDR          (192)
#define MCAN0_INST_MCAN_FIFO_1_NUM                 (2)
#define MCAN0_INST_MCAN_TX_EVENT_START_ADDR        (164)
#define MCAN0_INST_MCAN_TX_EVENT_SIZE              (2)
#define MCAN0_INST_MCAN_EXT_ID_AND_MASK            (0x1FFFFFFFU)
#define MCAN0_INST_MCAN_RX_BUFF_START_ADDR         (208)
#define MCAN0_INST_MCAN_FIFO_0_START_ADDR          (172)
#define MCAN0_INST_MCAN_FIFO_0_NUM                 (3)

#define MCAN0_INST_MCAN_INTERRUPTS (DL_MCAN_INTERRUPT_ARA | \
						DL_MCAN_INTERRUPT_BEU | \
						DL_MCAN_INTERRUPT_BO | \
						DL_MCAN_INTERRUPT_DRX | \
						DL_MCAN_INTERRUPT_ELO | \
						DL_MCAN_INTERRUPT_EP | \
						DL_MCAN_INTERRUPT_EW | \
						DL_MCAN_INTERRUPT_MRAF | \
						DL_MCAN_INTERRUPT_PEA | \
						DL_MCAN_INTERRUPT_PED | \
						DL_MCAN_INTERRUPT_RF0N | \
						DL_MCAN_INTERRUPT_TC | \
						DL_MCAN_INTERRUPT_TEFN | \
						DL_MCAN_INTERRUPT_TOO | \
						DL_MCAN_INTERRUPT_TSW | \
						DL_MCAN_INTERRUPT_WDI)



/* clang-format on */

void SYSCFG_DL_init(void);
void SYSCFG_DL_initPower(void);
void SYSCFG_DL_GPIO_init(void);
void SYSCFG_DL_SYSCTL_init(void);
void SYSCFG_DL_SYSCTL_CLK_init(void);
void SYSCFG_DL_ADC12_0_init(void);


void SYSCFG_DL_MCAN0_init(void);

bool SYSCFG_DL_saveConfiguration(void);
bool SYSCFG_DL_restoreConfiguration(void);

#ifdef __cplusplus
}
#endif

#endif /* ti_msp_dl_config_h */